Promax™ 358 mesh 3-metre: the fastest-installing anti-climb fence in Australia
DESCRIPTION
Promax™ 358 mesh 3-metre wide fencing is the fastest-installing high security perimeter system in Australia. The close-spaced 358 anti-climb mesh, with a 75mm x 13mm aperture, resists climbing, cutting and penetration by hand tools, making it the specified choice for prisons, critical infrastructure, government and large-scale commercial projects often required to meet Australian Standards for perimeter protection.
Profence is Australia’s leading manufacturer of close-spaced anti-climb security mesh, with the Promax™ 358 3-metre panel engineered specifically for projects where installation efficiency and total cost matter as much as security performance. The 3-metre panel width reduces post counts by up to 25% compared to standard 358 mesh, cutting installation time and total project cost on large-scale infrastructure jobs. For applications requiring even higher penetration resistance, the Promax™ 258 mesh offers a denser 50mm x 13mm aperture variant.
Profence offers two engineered post systems to suit any high security application. The innovative Promax™ T-post is manufactured from high-strength, lightweight material that streamlines transport and accelerates installation without compromising structural integrity. For projects with heavier structural demands, Promax™ 358 3-metre mesh is also compatible with our UC post system, suited to applications requiring increased load capacity or site-specific engineering.
Specify Promax™ 358 3-metre wide mesh with post and rail configurations or as a rail-less anti-climb structure, depending on the security level required. Backed by a 10-year warranty and 100% Australian-made.
KEY FEATURES
- Australian-made 358 security mesh manufactured to the highest specifications
- 3-metre wide panels reduce post counts and accelerate installation on large-scale projects
- Anti-climb, anti-cut design resists vandalism and forced entry
- 75mm x 13mm aperture maintains clear visibility through the fence
- Compatible with Promax™ T-post or UC post systems for application-specific engineering
- Available in heights up to 6 metres
- Specify with post and rail or as a rail-less anti-climb structure
- Premium LifeMax zinc and aluminium alloy coated wire, powder coat finish available
- Custom-engineered solutions including cut and raked panels for complex sites
- Backed by a 10-year warranty with same-day dispatch on stock product
PREMIUM QUALITY
Manufacturer Direct service and quality guaranteed
AUSTRALIAN OWNED
Trusted products Made in Australia
CUSTOM SOLUTIONS
Manufactured to your specifications
GUARANTEED DELIVERY
Speedy delivery direct to site
EXTENSIVE STOCK
One stop shop, largest stockist of security fencing
FENCE SYSTEM COMPONENTS
PROMAX 358 VARIMESH – POST CENTRES 2450MM
PROMAX 358 VARIMESH – POST CENTRES 3050MM
PROMAX ULTRA MESH – POST CENTRES 2450MM
FASTENERS – Galvanised
POSTS – HOT DIP GALVANISED 100X120X6
CORNER POSTS – 125X125X8 EA (16KG PER METRE)
RAILS
BARBED WIRE
CONCERTINA RAZOR TAPE – GALVANISED
FLAT LOOP RAZOR TAPE – GALVANISED
BULLDOG SPIKE TOPPINGS – HDG
Single, double swing or sliding gates are available. Most common sizes include – 1.2M Pedestrian gates, 4.8M and 6M double gates.
Custom-engineered gates to match fence height and customer specifications.
PROMAX 358 VARIMESH – 30, 50, 70 VARI PITCH ONE END – SUIT POST CENTRES 2450MM
PROMAX 358 VARIMESH – 30, 50, 70 VARI PITCH ONE END – SUIT POST CENTRES 3050MM
PROMAX ULTRA MESH – 30, 50, 70 VARI PITCH ONE END – SUIT POST CENTRES 2450MM
FASTENERS – Galvanised
POSTS – HOT DIP GALVANISED 100X120X6
CORNER POSTS – 125X125X8 EA (16KG PER METRE)
RAILS
TOPPINGS
Single, double swing or sliding gates are available. Most common sizes include – 1.2M Pedestrian gates, 4.8M and 6M double gates.
Custom-engineered gates to match fence height and customer specifications.
PROMAX FENCING SPECIFICATIONS
Post options for high security 358 mesh or EA mesh fencing
WARRANTY
High-Security fencing Warranty – Protective Fencing, as the manufacturer of the PROMAX security system, warrants that the products will be suitable for the proposed intended and free of any manufacturing defects for ten years.
TESTING & STANDARDS
Promax fencing systems are manufactured and tested to ensure they comply with the following standards:
✓AS/NZS 4100-2020 Steel structures
✓AS/NZS 4534-2006 Zinc/Zinc Aluminium alloy coatings on steel wire.
✓AS/NZS 2423-2002 Coated steel wire fencing products for terrestrial, aquatic and general use.
✓AS/NZS 4680-2006 hot dip galvanised (zinc) coatings of fabricated ferrous articles.
✓AS/NZS 4506-2005 Metal finishing – Thermoset powder coatings.
✓BS EN 10223-4-1998 Steel and wire products for fencing. Steel wire welded mesh.
✓BS EN 1722-12-2006 specification for steel palisade fences.
WIND LOADING
There are several wind loading factors to consider when specifying a fencing system as per AS1170.2:2011, including the region, terrain category multiplier, wind directions, shielding, topographic multipliers and post-disaster importance level.
Our fencing design has been tested against the harshest environments, and we can provide a solution for every environment.
Our fencing experts are here to help you with your design. Our experienced team will ensure that your project meets the required standards.
POWDERCOATING
Protective Powdercoating is an accredited applicator of Interpon Metaplex commercial coatings on hot-dipped galvanised steel.
- Interpon Metaplex Commercial Accredited Applicator, product warranty available depending on topcoat selection.
- Powdercoating completed per AS/NZ 4506-2005 Metal Finishing – Thermoset Powder Coatings.
