FOR ARCHITECTS & SPECIFIERS
Resource hub.
The details behind your design.
Find product drawings, technical guidance and project support.
AS/NZS 5131
Construction Category 1
Somersby manufacturing facility
01 / PRODUCT LIBRARY
Start with your product.
No matching products
Try a broader term or choose another range.
Supplied drawings are approved. Verify your email to download available PDFs; outstanding drawings are listed separately within each product.
02 / DESIGN & SPECIFICATION
Resolve the details early.
Choosing chainwire
mesh and posts
Mesh options, post classes and the components of a complete system.
Read guide ↗02DESIGN PROCESSFrom shop drawings
to manufacture
Resolve gates, levels, connections and interfaces before fabrication.
Read guide ↗03MATERIALS & FINISHESDesigning for
corrosion resistance
Understand material choices, protective finishes and ongoing care.
Read guide ↗03 / TOOLS & CALCULATORS
Work through your options.
04 / ENGINEERING & TESTING
Evidence for your specification.
Preview the document scope, then request the report that applies to your project.
System capacity
& design assumptions
PROMAX 358 system assessment
Review the relevant fence configuration, wind assumptions and site-specific footing requirements with our team.
Weld shear
& tensile testing
Mesh mechanical testing
Ask for the relevant weld shear and tensile test records, with sample identification and report scope.
Full reports are supplied by our team. Applicability depends on the product, configuration and project conditions.
05 / CERTIFICATION & QUALITY
Certified fabrication.
Clearly defined scope.
Our Somersby facility is certified by Steelwork Compliance Australia to AS/NZS 5131, Construction Category CC1.
For architects and specifiers, the scope identifies the fabrication activities covered by our certification.
Discuss your specification ↗- Certified facility
- 16 Pile Road, Somersby NSW
- Included activities
- In-house fabrication including welding
AS/NZS 1554 Part 1 - Welding scope
- GMAW · Grade 350 steel
- Certificate reference
- SCA-320
View scope exclusions
Coating, erection, AESS and AS/NZS 1554 Parts 2, 4, 5 and 7 are excluded from this certification.
Renewal approved. Updated certificate awaiting issue.
FROM SPECIFICATION TO SITE
See the details in practice.
PROJECT-SPECIFIC DETAILS
Can't find what you need?
Talk to our team about custom drawings, unusual interfaces or the right documentation for your specification.